Moenave trackless pivot garage doors
The Moenave system

No overhead
track.

Moenave hardware converts a standard sectional garage door into a single-piece tilt-up door. Everything mounts to the wall. The ceiling stays clear.

Why it exists
The garage finally looks the way it should.

Overhead track and ceiling openers were designed for garages that were small, low, and purely functional. Today's garages are none of those things.

With 9 and 10-foot openings now common in new construction, there's room for the door to tilt up as one piece and stay in the opening. The ceiling doesn't need to be involved at all.

Trackless door open, interior view with a clear ceiling
Installed
In the homes it was built for.
Full-view glass trackless door, exterior Full-view glass
Trackless door in a home gym garage Home gym
Wall-mount install at a Southern Utah residence Southern Utah install
Garage with an open architectural ceiling and no overhead track Architectural ceiling, LED light
How it works
A conversion, not a custom door.
Standard sectional garage door ready for conversion
01
Start with a standard sectional door

Your dealer sources the door in the size and style you want, from manufacturers they already work with.

Moenave pivot hardware locking sections into one piece
02
Lock it into one piece

Our patent-pending hardware ties every section into a single rigid door. No rollers, no hinges flexing between panels, no track.

Converted door tilting up within the opening
03
Tilt up on modern motor controls

A wall-mount operator drives the pivot. Springs carry the weight, so the door still opens by hand if the power goes out.

Door styles
Works with the door you already want.

If it's a standard sectional door with a flat interior face, it's a candidate. That covers most of what homeowners are choosing today.

Composite overlay doorComposite overlays
Plank woodgrain doorPlank and woodgrain
Modern flush panel doorModern flush
Full-view glass doorFull-view glass
See it in motion

Interior view. Full pivot, lights on, ceiling clear.

Why this system
Fewer parts. Cleaner ceiling.
No overhead track

The whole system lives on the wall. The ceiling is free for lighting, storage, a gym rig, or just headroom.

No hinges, no rollers

What's removed is what fails first. Nothing to wear out between panels, nothing to grease. Quieter by design.

Standard doors

Built around sectional doors that are already sold everywhere. No special door, no custom order.

Works without power

Spring counterbalance keeps the door operable by hand in an outage. No hydraulics.

Made for taller openings

The 8 to 10-foot openings in new homes are exactly where this system does its best work.

Locks when closed

Pre-engineered mounts for LiftMaster wall-mount operators, with a positive mechanical lock at the bottom of travel.

20 ft
Maximum width
10 ft
Maximum height
500 lbs
Maximum door weight
1.5–2.5″
Panel thickness
Integrated lighting
Light built into the system.

An RGBW LED light bar that plugs straight into the operator. It turns on when the door moves and off on its own.

On with the door

Plug-and-play with the operator. No extra switch, no timer to set.

Vertical or horizontal

Mount it in either orientation to put light where it's needed.

A true white channel

Task-level output when you're working, tunable color when you're not. Set it up from your phone, no app required.

Moenave integrated LED light bar
Sizing and fit
Sized to the opening, not the frame.

The opening is framed the same as any standard garage door. Only the door dimensions shift slightly.

A little narrower than the opening

The door is built slightly narrower so it swings through and lands cleanly without touching the jambs.

A little taller than the opening

Standard industry heights, sized just over the opening so it closes with a full seal.

For example: a 16-foot opening typically gets a door around 15 feet 10 inches wide. Your dealer handles the exact sizing.

Finishes, installed.
Aluminum full-glass doorAluminum, full glass
Composite elm woodgrain doorComposite, elm woodgrain
Black flush panel doorFlush panel, black
Walnut steel overlay doorSteel overlay, walnut
Questions
What people ask first.

A standard sectional door rolls up on overhead track, driven by a motor hung from the ceiling. Moenave locks the same door into one piece and tilts it up within the opening. All the hardware is on the wall, and the ceiling stays clear.

Most sectional doors 1.5″ to 2.5″ thick with a flat interior face are compatible, up to 20 feet wide and 10 feet tall. A few models, including the Wayne Dalton 9100 and 9605, are not. Your dealer confirms fit for your opening.

Yes. Our hardware mounts to the door and gives it vertical rigidity, so one- and two-piece doors work too. Sectional doors are just easier to handle and move into place.

It can, but you'll lose a fair amount of clearance because the door can't travel up into the arch. We recommend the system for square-top openings.

Not yet. The system currently goes up to 10 feet tall. Taller systems are planned for fall 2027.

Yes. Every system is built to fit your opening and door size.

Authorized Moenave dealers. It's a professional installation, and the dealer handles the door, the hardware, and the install.

Search the dealer map for the dealer nearest you and reach out for a quote.

The system is also available as a hardware kit. Add your door panels, a motor, and a few common parts. Shop the hardware kit.

Floor-to-ceiling clearance of the door height plus 11 inches. Full dimensions are in the install documentation.

The door is spring-balanced, so it can be opened and closed by hand.

Map of authorized Moenave dealers
Where to get it
Find an authorized dealer.

Search the map for the door company nearest you. They handle the door, the hardware, and the install.

View the Dealer Map
For door companies

Door companies across the country are adding Moenave to their lineup. If you install doors and want to offer the system to your customers, let's talk.

Inquire about becoming a dealer
© 2026 Moenave Door Systems — Moenave Garage Doors LLC — Washington, Utah